10 Best Table Saws

Professional contractors and enthusiastic DIYers alike know the significant value of a good table saw when it comes to woodworking. Table saws are invaluable with their ability to cut plywood sheets, make massive rip cuts, or tackle specific cuts like tenons and grooves. Table saw is an excellent investment that will help your wood works for a long time.

Before you splash your hard-earned money on the first piece of equipment that comes your way, remember that you’re making a significant investment. So it’s in your best interest to take some time to choose the right one for you. However, with many different options available to both DIYers and professional woodworkers, it could be a bit difficult to determine the right one.

To get you acquainted with some of the best tables saw you could lay your hand on, we will be reviewing the 10 Best Table Saws on the market. Finally, we’ll also be sharing valuable information you should know about when shopping for the best table saw.

DEWALT DWE7480 Compact Job Site Table Saw

If you don’t have a workstation that can fit a big table saw, the DeWALT DWE7480 is an excellent portable alternative to an enormous table saw with the same slicing power. The table saw is a step up from the famous DeWALT DW745, though it is slightly more expensive. This unit is powered by a 15 Amp motor that cuts at the top speed of up to 4,800 RPM.

After pairing the table saw power with its 47-degree bevel and of 24-1/2 inch inch Rip, it can run through even the hardest woods with precision and accuracy. With the adjustable rear feet feature, you can level the table saw on uneven surfaces so you can get a clean cut. This table saw proves that high performance can come in compact packages by balancing lightweight design and heavy-duty use

The Onboard storage gives you easy and quick access to the Site-Pro Guarding components. The Site-Pro Modular Guarding System has fence rails which allow you to create fence adjustments smooth, fast, and accurate. With the rip capacity of 24-1/2 inch, you can cut a variety of trim and shelving materials.


  • Compact
  • Reasonably priced
  • Efficient and powerful
  • Low-friction table surface


  • No stand included
  • Flimsy miter gauge

Bosch 10-Inch Worksite Table Saw 4100-09

The Bosch 4100-09 is a solidly built table saw with lots of work enhancing attachments which make your job easier to complete. This table saw powers on 15 Amp motor that delivers up to 4HP while rotating at the speed of 3,650 RPM. Having a rip capacity of 25 inches and 10 inches blade size, the Bosch 4100-09 can cut through almost any wood materials.

For enhanced safety, the table saw boasts of lock mechanism which allow you to change the blade with ease. SquareLock Rip Fence is also one of the features that set this table saw apart from other competitors. Bosch made it out of machined aluminum and with the SquareLock Rip Fence, you can slide up and down with no hassle, and the fixing position couldn’t get better.

The length of the table saw makes it suitable for large wood stock and sheets of material fabrication. Improvement has been made to the Smart Guard system as it now includes riving knife system and anti-kickback pawls – these provide maximum visibility while cutting and superior control over the material. The blade guard of the table saw is made of aluminum and the measurement marks are visible.


  • High-quality performance
  • Excellent build quality
  • Easy to use
  • Gravity-rise wheeled stand
  • Enhanced safety features


  • The miter gauge isn’t as solid

Makita 2705 10-Inch Contractor Table Saw

Makita is a brand known for producing top quality power tools, and this Makita 2705 table saw keeps the trend going. This table saw has all the latest features this makes it the best of the best. Makita powers the table saw with a 15 Amp motor that produces the maximum speed of 4,800 RPM. Also, the engine has an electric brake which offers you maximum productivity.

The large cutting capacity of the saw can rip 4x material in one pass, and you can use up to a 6 inch. X 13/16 inch. Dado blade. The maximum cut depth is 2-1/2 inches at 45 degrees and 3-5/8 inches at 90 degrees. The table saw comes with a new tool-less modular blade guard system, this makes it safer to operate.

The aluminum die-cast tabletop provides a smooth and accurate cut. And the riving knife can adjust to three different positions for dado cuts, through-cut, and non-through-cut. The combination of a range of ease of use and convenience features with massive capacity power makes this table saw suitable for a wide range of professional applications.


  • Suitable for heavy-duty projects
  • Sturdy construction
  • Electric brake feature


  • It is a bit heavy
  • The dead-on cam-locking rip fence mechanism needs an improvement

SKILSAW SPT70WT-01 10″ Portable Worm Drive Table Saw with 25″ Rip Capacity

The  SKILSAW SPT70WT-01 is one of the most compact and efficient table saws on the market. Despite its’ lightweight and compact design, the table saw pack a powerful 15 Amp Dual Field motor. Thanks to the incredible ripping capacity and raw torque, the SKILSAW SPT70WT-01 can be an invaluable addition to your repertory whether you’re a professional contractor or a DIYer.

The table saw has a ripping capacity of 25 inches, that you can easily split a piece of plywood into two. With a die-cast aluminum top and sturdy all-steel roll cage design, the table saw is light enough for easy and quick job site setup. The durability, solid build, anti-kickback technology, and worm drive gearing makes this table saw reliable.

The  SKILSAW SPT70WT-01 is the world’s first worm drive table saw; this means the manufacturer designed it for ripping. The worm drive gearing delivers maximum torque and excellent power for cutting through different materials without bogging down.


  • High-quality construction
  • Worm drive gear
  • Smooth startup
  • Includes Dado blade


  • Miter gauge tool is plastic
  • Quite loud

SawStop PCS31230-TGP236 3-HP Professional Cabinet Saw

The SawStop PCS31230-TGP236 Cabinet Saw is designed with an unmatched finish that offers a fully featured and high-end cabinet saw. With tons of brute power which is supplied by the 220 Volt and 3HP motor, the table saw cuts through the hardest wood effortlessly. The SawStop PCS31230-TGP236 comes with safety and complete versatility in mind for discerning professionals and avid hobbyists.

The table saw is equipped with a patented safety system which can stop the blade in the case of accidental contact instantly. To achieve the kind of precision and accuracy that professional contractors demand, SawStop include T-Glide fence of 36-inch which gives you extra strength and utmost precision. For the blades, the table saw supports all standard 10-inch blades and 8-inch dado blades.

SawStop build the table saw to collect about 99 percent of the dust and dirt via a blade guard that is above the table and into the collection port beneath the table. The table saw has series of features that enhance its performance – they include but not limited to the riving knife which reduces the issues with kickback, and the left tilting blade that stops the timber going against the table saw fence.


  • High-quality construction
  • Optimum performance
  • Excellent dust collection system
  • Perfect for a variety of application
  • SawStop safety system


  • Not suitable for confined workstation
  • Quite expensive

Rockwell RK7241S Table Saw with Laser

If you’re looking for a heavy-duty table saw with great design and unique features, the Rockwell RK7241S Table Saw got you covered. The contractor table saw is equipped with laser technology which makes cutting more accurate. Besides the laser feature, this table saw has a range of useful features that ensure consistent and smooth cuts. This saw makes far deeper cuts than any of the table saw in its class.

Just like most table saws in this category, it boasts of a 15 Amp motor. However, the Rockwell RK7241S runs at a no-load speed of 4800 RPM. You can count on the table saw if you plan to cut pressure-treated lumber or hardwood. It has a 10-inch blade, and the cutting capacity is far higher than other units in this range. The rip capacity is a stunning 30-inch, and it has the most profound cutting depth of 2-9/16 inches at a 45-degree angle and 3-9/16 inches at a right-angle.

The build quality of this table saw is outstanding; Rockwell made a quality model that is strong enough for regular heavy-duty use. With the cleverly constructed design of this table saw, you get portability, power, and precision.


  • LaserGuide technology
  • Great gripping capability
  • Dust collection bag
  • Expandable Fence


  • Foldable legs tend to wobble after a while

Bosch 10-Inch Portable Jobsite Table Saw GTS1031

The Bosch GTS1031 Table Saw is the perfect choice for those in need of portable and easy to move table saw. If you can handle anything that weighs 52lbs, then you can carry this table saw using one hand. Despite its compact size, this table saw comes with sheer power and the powerful 15 Amp motor produces 5000 RPM.

Also, this table saw can cut deep as 2-1/4 inches at 45 degrees and 3-1/8 inches at 90 degrees. Bosch built this table saw around all steel bases making it more durable. Just like the Bosch 4100-09 table saw, this model also comes with a Squarelock rip fence – meaning you don’t have to adjust and it will produce a consistent and smooth cut every single time.

The tool has onboard storage which could come in handy. And the 18 inches rip capacity makes it suitable for small to medium-large sheets of material like lumber, hardwoods, shelving, plywood and other applications. The rip fence is built to keep the ideal square alignment with little to no adjustment required. All you need to do when adjusting the fence is lift the lever and fit it to the position you prefer.


  • One-handed carry handle
  • Affordable price
  • Compact and easy to carry
  • Excellent design



  • Not suitable for the heavy-duty project

Shop Fox W1819 3 HP 10-Inch Table Saw

If you are a professional contractor searching for a worthy investment in a table saw, look no further. This table saw is interested in nothing other than giving you quality and pure performance. Shop Fox housed the engine in a heavy cast iron construction – it boasts of a 3HP Leeson motor which makes use of belt drive to deliver power to the blade. And the table and wings come out of heavy cast iron.

The Shop Fox W1819 also comes with a riving knife and camlock T-fence that follow the movement of the massive cast hand-wheels, blade, and magnetic switch. The work area of the table saw is spacious and suitable for several different applications. The adjustable T-glide fence allows you to cut with high accuracy and precision. And the rip capacity of this table saw is 29-1/2 inches.

The table saw has a blade guard that comprises of anti-kickback pawls and a clear polycarbonate shield. And the guard won’t disrupt the flow of the material sheet. Another excellent benefit of this table saw is that you don’t need to buy a premium vacuum because it works with just about dust collector.


  • Optimum performance
  • Sturdy construction
  • Spacious cutting area
  • Incorporated cabinet


  • Flimsy miter gauge


DEWALT DWE7491RS 10-Inch Jobsite Table Saw

If you’re searching for a high-quality table saw with excellent build quality, solid stands, and powerful motor, the DEWALT DWE7491RS is your best choice. The table saw packs quite a punch and can cut through even the hardest woods. With the measurement of 26 x 22 inches, this table saw has enough space for most applications. The saw can make cuts in depth from 2-1/4-inch at a 45-degree angle to 3-1/8-inch at 90 degrees.

The 15 Amp motor delivers a force that can cut through hardwoods. The table saw’s rack and pinion fence are one of the best in the market. You can also lock and unlock it using one hand, and no matter how hard you press, the sheet will stay in place. Another excellent feature of this table saw is the incredible 32-1/2 inches rip capacity.

Like most high-quality table saws, this model boasts of 2-1/2-inch dust collection port which you can easily connect to the vacuum for active dust and dirt extraction. For safety, the model has a power switch with Power Loss Reset – in case of electrical glitches, the table saw will automatically reset.




  • Wide ripping capacity
  • Easy to setup
  • Suitable for tough woods
  • Sturdy construction




  • Not suitable for 4-inch lumbers


Powermatic 1792000K Model PM 2000 3 Horsepower Cabinet Saw

If you are looking for the best cabinet saw table with optimum performance, high-quality finish, and safety feature, The Powermatic 1792000K is second to none. The attention to detail is impeccable in this table saw, and the tons of raw power can cut through wood like butter. Powered by a 3HP 1PH motor, this unit is an award-winning table saw that set a new standard for innovation with different types of patented features.

The Powermatic 1792000K Table Saw boasts of the most massive cast iron base which virtually prevents the table from vibrating. The table saw has a magnetic On/Off switch for safety which helps prevent accidental start-ups and the removable magnetic key disable the turn when not in place. It also comes equipped with a quick-release riving knife which reduces kickback and binding risks.

The commercial grade heavy-duty 50-inch Accu-Fence System provides accurate cuts while for repeatable bevel cuts, the table saw packs adjustable angle indicators. Plus, the heavy-duty micro-adjust miter gauge and extension fence of 13-inch gives an operator easy fine-angle adjustments and stable work-piece support. For smooth movement, Powermatic built a retractable four-wheel caster system in the massive cast-iron base.




  • High-quality design
  • Perfect for heavy-duty projects
  • Rugged design for smooth operation
  • Spacious tables and extensions
  • High-Tech Guard System




  • Quite expensive


Best Table Saw Buying Guide

A table saw will be one of your most essential assets if you’re serious about woodworking. With any power tool purchase, there are some things you’ll need to take into consideration. As usual, some factors have a more significant impact or are more crucial for buyers all round satisfaction. Now let’s take a look at some of the most vital points to remember.

Different Types of Table Saws

There are four main types of table saws, and it is essential to know the primary function and the difference between them when shopping for the best table saw. The kind of saw perfect for a DIYer who only needs to make simple cuts for home improvement project may not be ideal for the professional contractor who needs a table saw for fine woodworking. The most widely accepted table saw includes:

Portable Table Saw

Portable table saws also called worksite, job site, or benchtop saws primarily come from lightweight materials, this makes them easy to transport. They are the smallest table saw and a favorite with operators that move tools from place to place. The portable table saw on a smaller scale perform the same primary function as any other type.

The portable table saws don’t come with a stand, and the design makes it possible to mount them on a workbench or table. The motors on this type of table saw are typically much smaller and less robust. Due to the light build, they also suffer from less cutting power and stability than the other types of table saws. However, they are incredibly affordable.

Contractor Table Saws

Contractor table saws are a bit different from portable table saws. The contractor table saw pack more weight, and the motor is usually more powerful. Another significant difference is that the contractor table saw has a fixed open base while the portable table saw comes with a foldable frame base. Just like the portable saw, they are also highly affordable.

Cabinet Table Saws

Cabinet table saws are the excellent options designed to meet the need of professional woodworkers. They boast of powerful induction motors ranging from 3 to 5 HP and has enclosed cabinet. They are built from the best materials so they could be more durable, deliver high performance, accuracy and make straight and smooth cuts.

These table saws are also suitable for professional’s workstation where you need to keep dust and noise under control. However all these come at a price, they are the most expensive type of table saw. And they are also the heaviest.

Hybrid Table Saws

The hybrid table saws combine the studier construction and more powerful motor of cabinet table saws with the lighter weight of contractor table saws. And they come at a price that an average woodworker can afford. The engine of the hybrid table saws is usually within the range of 1.5 to 1.75 HP.

Essential Table Saw Features


A table saw fence is one of the vital features and this allows you to make square, repeatable, and precise cuts. Though there are different types of fencing systems, you need to look for a table saw with a solid fence. The right one should lock firmly into place and come out just as smoothly each time.


Portable table saws have a direct drive motor that runs on 120V, and they can deliver up to 2 HP which is enough for cutting thinner sheets. More powerful table saws, however, come equipped with motors that can deliver 3 to 5 HP and they operate on a 240V circuit.


The tilt of the blade, on/off switches, wheels, table extensions, dust port, and hand wheel should come with the best table saws. These features can increase the basic functionality of the table saw. You should look out for any of these accessories you feel is a priority because you may not be able to find every prop in a table saw.


Just like every other power tools, safety is paramount. Table saws have become safer, but they can still post a lot of danger. The blade guard is the most crucial and noticeable safety feature of every table saw. Its function is simple; it is designed to keep your fingers away from the saw blade. While other safety features like riving knives, splitters, and anti-kickback pawls are built to reduce kickbacks.


We will be happy to hear your thoughts

Leave a reply

Login/Register access is temporary disabled